Ammeraal Conveyor Belting

Goose Neck Conveyor

CLICK AND MOVE IMAGE ABOVE FOR 360o VIEW

Goose Neck Conveyor

AEON

The conveyor is recommended to be one-directional with one drive motor. Relevant considerations from the design guide of the long horizontal conveyor should be observed.

Sprockets need to be laterally constrained to their respective shafts.

Minimum Belt Radius

As the belt runs through the transition between flat and inclined, ensure a minimum radius of 350 mm is maintained.

Belt Restraints

To assist moving product up an incline, Goose Neck Conveyors are fitted with cleats across the width of 

the belt.

This will impact the operation of the BELT RESTRAINER and the RETURN-WAY SUPPORTS. The BELT RESTRAINERS on the DRIVE SPROCKETS will exclude central restraints.

We recommend using sliding supports on a 55 mm wide clear section along the belt edges. An additional TOP CONTAINMENT BLOCK is required for the carry-side bottom corner. A narrow sliding restraint can be used.

Want More Info? Enquire Now

If you would like more info on our Goose Neck Conveyor then phone us now on (03) 9794 8870...or complete and send the enquiry form below and we'll get back to you shortly

AEON Positive Drive Conveyor Belts

Our flat, and positive driven, homogeneous conveyor belting combine the advantages of conventional, modular and solid conveyor belts without the hygiene issues.

International Standards

Our conveyor belts comply with the most stringent international standards, are AQIS, FDA and USDA approved for contact with raw and cooked foods, perfect for use in all food processing industries including:

Conveyor Belting & Accessories

Ammeraal Conveyor Belting are manufacturers of homogeneous Big Bear Polyurethane & Amra Polyester Conveyor Belting. To compliment this range we also stock a high quality range of PU and PVC plied conveyor belting suitable for a variety of applications.